Furuno FSV-84 manual Vertical bearing mark, tilt mark, Solid Line Dashed Line

3. VERTICAL MODE

3.3.2Vertical bearing mark, tilt mark

The vertical bearing mark is displayed with solid and dashed lines and it shows the bearing selected on the horizontal display. The circle at the top of the vertical bearing mark has a “V” inside of it in the vertical 1 mode, or “1” and “2” as appropriate when both the vertical 1 and vertical 2 modes are active. Its bearing may be referenced to North (true) or ship’s heading (relative, default setting) on the menu.

The tilt mark is a solid and dashed line which shows in the vertical display the tilt angle set on the horizontal display.

The meaning of the solid and dashed lines are as shown in the table below.

	Solid Line	Dashed Line
Vertical Bearing Mark	Range from own ship to	Range further than vertical
	vertical scan range	scan range
Tilt Mark	Range from own ship to	Range further than
	horizontal scan range	horizontal scan range

	V = Vertical 1
	1, 2 = Vertical 1, Vertical 2
V
	VR
Vertical bearing mark
Tiltangle	Tilt mark

HR = Horizontal Range

VR = Vertical Range

HR

HR

Tilt mark

Vertical scan and horizontal scan ranges

3-4