Furuno FSV-84 manual Auto Train, Trackball mark position reference mark, Auto train

3. VERTICAL MODE

3.3.3Trackball mark position reference mark

The trackball mark position reference mark, a solid circle, is inscribed on the vertical bearing mark when the trackball mark is placed in the vertical display. Its purpose is to show corresponding trackball mark position on the horizontal display. It changes position with trackball mark position, tilt and range, and disappears when its position is no longer within the range of the horizontal display.

V (Vertical 1), or		VERTICAL
	V	DISPLAY
1 or 2 (Vertical 2)		Vertical
		bearing
Trackball		mark
mark position
reference		Tilt mark
mark
		Trackball mark

Vertical bearing mark, trackball mark position reference mark

.

3.4Auto Train

You may scan the vertical bearing mark in the sector of OFF, ±12°, ±24° and

±36°.

1.Press and hold down the [AUTO TRAIN] key while pressing the [V1/S] or [V2] key to choose auto train sector desired. Selected sector appears in large characters for five seconds for your confirmation.

Auto train mark

Auto train sector

1

Vertical bearing mark

Auto train

2. To quit the auto train, set OFF at the step 1.

3-5