Furuno FSV-84 manual Display Range

4. SLANT MODE

4.3Display Range

The [RANGE] control selects the detection range. The range selected is momentarily displayed in large characters at the top of the screen. Range is always displayed at the top right hand corner of the screen.

	SEA SURFACE
	SEA SURFACE
	Range indicated
BOTTOM	onRangethe screenindicated.
	on the screen.
BOTTOM

Range concept

Below are the default ranges (in meters).

Range Setting	1	2	3	4	5	6
Range	100	200	400	600	800	1000

1.If the slant display or slant combination display is active, press the [HSV] key to choose the slant mode.

Range and gain indications for the slant display are shown in yellow.

2.Operate the [RANGE] control to select desired range.

Note 1:Ranges may be preset as desired on the PRESET, MEMORY CARD menu. For further details, see H/S-SCAN RANGE on page 9-5.

Note 2: With the target lock feature active, range is automatically changed according to target position. (INTERLOCK on the TARGET LOCK menu is set to the option TILT&RANGE.)

4-7