Furuno FSV-84 manual Vii, Table of Contents

				TABLE OF CONTENTS
3.	VERTICAL MODE			3-1
	3.1	Basic Operating Procedure		3-1
	3.2	Vertical Mode Concept		3-2
		3.2.1	Overview	3-2
		3.2.2	Setting the vertical display	3-2
	3.3	Vertical Mode Indications and Marks		3-3
		3.3.1	Typical vertical display	3-3
		3.3.2 Vertical bearing mark, tilt mark		3-4
		3.3.3 Trackball mark position reference mark		3-5
	3.4	Auto Train		3-5
	3.5	Display Range		3-6
	3.6	Measuring the Range		3-6
	3.7	Eliminating Weak Echoes		3-7
	3.8	Suppressing Bottom Tail		3-10
		3.8.1	Adjust AGC	3-10
		3.8.2	Decrease pulse length	3-10
		3.8.3	Adjust 2nd AGC	3-11
		3.8.4	Adjust Near AGC	3-11
	3.9	Rejecting Interference and Noise		3-12
		3.9.1	Identifying noise source	3-12
		3.9.2	Interference rejector	3-12
		3.9.3	Noise limiter	3-13
		3.9.4	Shifting Tx frequency	3-13
		3.9.5	Echo average	3-13
		3.9.6	Reverberation reduction	3-13
		3.9.7 Suppressing gain of bottom echo		3-14
		3.9.8	Suppressing sidelobes	3-14
	3.10	Adjusting Beamwidth		3-15
	3.11	Vertical Expansion Display		3-16
	3.12	OTHERS Menu		3-17
		3.12.1 Displaying the OTHERS menu		3-17
		3.12.2	OTHERS menu description	3-18
	3.13	Application to Bonito and Tuna Fishing		3-21
		3.13.1	Searching	3-21
		3.13.2	Tracking	3-21
		3.13.3	Approaching	3-21
		3.13.4	Catching	3-22
4.	SLANT MODE			4-1
	4.1	Basic Operating Procedure		4-1
	4.2	Indications and Marks		4-2
		4.2.1	Slant mode single display	4-2
		4.2.2	Slant mode combination display	4-3
	4.3	Display Range		4-7
	4.4	Tilt Angle		4-8
		4.4.1	Setting the tilt angle	4-8
		4.4.2	Automatic tilt	4-9
	4.5	Auto Training		4-11

vii