1. OPERATIONAL OVERVIEW

1.3Lowering, Raising the Transducer

CAUTION

Maximum speed while the transducer is projected and being raised or lowered is as below, to prevent damage to the transducer.

 

Projected

Raising/

 

 

Lowering

 

 

 

800 mm stroke

Max. 18 kt

Max. 15 kt

 

 

 

1100 mm stroke

Max. 18 kt

Max. 15 kt

 

 

 

1.3.1Lowering the transducer

With the boat at the fishing ground, press the [] or [] key. The lamp above the key pressed blinks during lowering and lights when the transducer is completely lowered to selected protrusion distance. It takes about 21 seconds for full protrusion in case of 800 mm stroke and 28 seconds in case of 1100 mm stroke. In normal use fully lower the transducer. If the transducer becomes entangled in the net for some reason, partially raise the transducer with the [] key. This raises the transducer by 400 mm.

1.3.2Raising the transducer

Press the [] key to raise the transducer. The lamp above the switch blinks while the transducer is being raised and lights steadily when it is fully raised.

1.4Screen Brilliance

The [BRILLIANCE] control adjusts screen brilliance. Adjust it to suit lighting conditions.

Note: The brilliance of an external monitor cannot be adjusted with the [BRILLIANCE] control. Use the associated control on the monitor.

1-3

Page 19
Image 19
Furuno FSV-84 manual Lowering, Raising the Transducer, Screen Brilliance, Lowering the transducer, Raising the transducer