Furuno FSV-84 manual Vertical Mode Indications and Marks, Typical vertical display

3. VERTICAL MODE

3.3Vertical Mode Indications and Marks

3.3.1Typical vertical display

The vertical mode provides a vertical section of the horizontal picture. You may show the display on the right or left side of the screen in case of the vertical 1 mode. An expansion mode is available to enlarge the picture. To display the vertical mode press the [MODE] key and choose V1, V1 & V2, V1 & ES1 or V1 & ES2.The example below shows the V1 mode.

Vertical bearing mark (See next page.)

Trackball data

Slant range	1547m	N
		V
Horizontal range	1473m
Vertical range	473m
Angle to trackball	A 33°
mark from
horizontal

Trackball mark						NUMERIC/
position reference	W				E	GRAPHIC
mark						DATA
(See page 3-5.)						DISPLAY
		500	1000		1500
	500				2000
Vertical display 1
	1000
	V	12˚	R 2000m	G 8.0	S

					Tilt mark
					(Shows tilt angle set
					on horizontal display.)
						Target lock mark
						(Entered on
						horizontal display.)
Range scale			500	1000		1500
(Displays horizontal
range and depth.
Grid inscribed
in increments	500
of 1/4 of the range
in use.)
	1000
	R	2000m
VERTICAL SCAN DATA	G	8
		°	R 2000m	G 8.0
Bearing, Range, Gain	V 1256￿
(Appears only in vertical 1 display;
			Bottom echo
vertical scan data is common to						Trackball mark

both vertical 1 and vertical 2 displays.)

Vertical 1 display indications and markers

3-3