Furuno FSV-84 manual Data Display menu

9. OTHERS MENU

DATA DISPLAY menu

This menu sets the readout format for marks on the display.

Default settings are shown in the illustration below.

MENU	QUIT
OTHERS	QUIT
INITIAL SETTING	QUIT
DATA DISPLAY	QUIT

RANGE & BEARING	: ON
CURSOR POSITION	: OFF
COURSE	: 32 CMPS
CURRENT DATA	: 360˚TRUE
EVENT MARK	: 32 CMPS
OTHER MARKS	: ±180˚ REL
DISTANCE FOR SHOOT	: MILE
WATER TEMP	: ˚C

DATA DISPLAY menu

RANGE & BEARING: Turns on/off the range and bearing data which appears when the range and bearing marks are turned on.

CURSOR POSITION: Turns on/off the cursor position (latitude and longitude) display. Requires navigation data.

COURSE: Selects how to display course: 32 compass points, 360 ° True, 360° Relative, 180° Relative.

CURRENT DATA: Selects how to display tidal current data; 32 compass points, 360 ° True, 360° Relative, 180° Relative.

EVENT MARK: Selects how to display event mark data; 32 compass points, 360 ° True, 360° Relative, 180° Relative.

OTHER MARKS: Selects how to display other mark data; 32 compass points, 360 ° True, 360° Relative, ±180°. ±180° shows xxxS in case of starboard direction; xxxP in case of port direction. True indications require heading sensor. 32 compass points shows bearing with alphabet indication, for example, “NNE”.

DISTANCE FOR SHOOT: Selects the distance run unit to show the distance run after shooting the net. The choices are miles, meters and feet.

WATER TEMP: Chooses water temperature unit; in °C (Celsius) or °F (Fahrenheit).

9-11