2. HORIZONTAL MODE

2.4Tilt Angle

The tilt angle shows the direction to which the sound wave is emitted. When the sound wave is emitted horizontally, the tilt angle is said to be 0° and when vertically, 90°. The tilt angle can be set between –5°(upward) to 90° (downward), in increments of 1°. The tilt angles for horizontal 1 and horizontal 2 modes can be set independently of one another.

2.4.1Setting the tilt angle

To manually set a tilt angle, operate the [TILT] control. Watch the tilt angle indication and tilt angle indicator at the top right corner of the screen.

Select tilt angle depending on target fish. For surface fish select a shallow angle (about 5°) and for bottom fish, a deep angle.

-5-degree

0-degree horizontal direction (tilt angle 0-degree)

Transducer

Tilt angle setting range +90-degree

Note: The [TILT] control functions as a bearing setting lever in the following conditions:

TILT LEVER in the DISPLAY SETTING menu is set to “TILT & V1.”

The vertical display is chosen in the vertical mode.

2-8

Page 42
Image 42
Furuno FSV-84 manual Tilt Angle, Setting the tilt angle