Furuno FSV-84 manual Echo sounder picture advance speed dialog box

1.OPERATIONAL OVERVIEW

3.Select menu item desired with the trackball and press the [MENU] key. (For example, select NOISE LIMITER.) A dialog box for the corresponding menu item appears.

MENU QUIT

H-SCAN SETTING		QUIT
TX INTERVAL	: 9
TX PULSE LENGTH	: 9
TX POWER	: 9
TVG-NEAR	: 0
TVG-MEDIUM	: 0
TVG-FAR	: 0	QUIT
NOISE LIMITER	: 2	CANCEL
REVERBERATION	: 0
SIDE LOBE SUPPRESS	: 1
AGC	: 0
2ND AGC	: 0
NEAR AGC	: 0
ECHO AVERAGE	: 0
INT REJECT	: 0
BOTTOM SUPPRESS	: 0
FREQ SHIFT	: 0
FREQ/BEARING SET	: 180
OTHERS...

How to set numeric data

1.Select or as desired. 2. Press the [MENU] key to

change setting.

3.Select QUIT and press the [MENU] key to finish.

H-SCAN SETTING menu

4.Select S (raise setting) or T (lower setting) with the trackball and press the [MENU] key to change setting.

Note: For items having options the arrows in the dialog box are replaced with appropriate options. For example the dialog box for selection of picture advance speed in the echo sounder mode looks as below.

QUIT

CANCEL

1/1

1/2

1/4

1/8

SPEED SYNC

Echo sounder picture advance speed dialog box

5.Use the trackball to select QUIT from the dialog box and press the [MENU] key to close the menu.

6.Select QUIT at the top of the menu screen and press the [MENU] key to close all menus.

1-16