Opening the Alarm & Audio menu | Furuno FSV-84 specs

9. OTHERS MENU

9.3ALARM & AUDIO menu

9.3.1Opening the ALARM & AUDIO menu

The ALARM & AUDIO menu sets the fish alarm and the audio bearing mark sector.

1.Press the [MENU] key to open the menu.

2.Select OTHERS and press the [MENU] key.

3.Select ALARM & AUDIO and press the [MENU] key.

MENU		QUIT
MENU		QUIT

OTHERS		QUIT

ALARM & AUDIO		QUIT
ALARM & AUDIO		QUIT

FISH ALARM	: OFF
ALARM LEVEL	: 16
ALARM ZONE...
SHIP SPEED ALARM	: ON
AUDIO	: ON
AUDIO SECTOR	: 30°
REVERBERATION	: 0

ALARM & AUDIO menu

9.3.2ALARM & AUDIO menu description

FISH ALARM: Turns the fish alarm function on or off. The default setting is off.

ALARM LEVEL: Sets the minimum echo color which triggers the fish alarm. The setting range is 0-30 and the default setting is 16.

ALARM ZONE: Sets fish alarm zone. For further details see “2.14 Fish Alarm”.

SHIP SPEED ALARM: The default setting is on. So if the ship speed exceeds limit speed (See page 11-5) during transducer raising/lowering or being extended the buzzer sounds. You can set this alarm deactivated.

AUDIO: Turns the audio function on (default setting) or off. For further details see “2.12 Detecting Fish Schools Aurally”.

AUDIO SECTOR: Choose audio sector width for use with audio function. The choices are 0°, 60°, 90°, 180° and 330°. For further details see “2.12 Detecting Fish Schools Aurally”.

REVERBERATION: Chooses length of reverberation for audio signal. The setting range is 0-9 and the default setting is 0 (no reverberation). The larger the value the longer the reverberation.

9-4

Image 198

Furuno FSV-84 manual Opening the Alarm & Audio menu, Alarm & Audio menu description

Contents

Color Scanning Sonar 00015742711 Important Notices Safety Instructions Iii Replace anticorrosion zinc plate yearly This page intentionally left blank Table of Contents Safety Instructions Table of Contents Vii Viii NUMERIC/GRAPHIC Data Display MAINTENANCE, Troubleshooting Features ForewordWord to the Owner of the Furuno FSV-84 Xii System with locally supplied monitor System ConfigurationBlackbox type configuration Xiii Standard type configuration System with Furuno monitorXiv Operational Overview Control DescriptionControl unit Turning the power off Turning the Power On/OffTurning the power on Power & Transducer controls Lowering the transducer Lowering, Raising the TransducerScreen Brilliance Raising the transducer Main menu default Control Panel DimmerOthers menu Display Setting menu Dialog box for setting numeric value Selecting a display mode Mode selection menusDisplay Mode, Display Division Sample display mode pictures Horizontal modeHorizontal mode display H2 mode Horizontal 2 display Slant mode, combination display Slant mode, single displaySlant display single Slant display combination V1 and V2 displays V1 + ES1 or ES2 modeV1 and V2 modes V1 & ES1 ES2 display History display History modeES1 mode ES1 display ES2 display shown downward picture ES2 modeES1 + ES2 mode ES1 + ES2 display Adjusting the Gain Menu Overview Main menu Scan Setting menu Menu Title Echo sounder picture advance speed dialog box YES This page intentionally left blank Horizontal Mode Basic Operating Procedure Horizontal mode Horizontal mode indications and marksIndications and Marks Horizontal2 mode Dialog box for setting combination Landscape Left Inset Display Range Range concept Setting the tilt angle Tilt Angle Automatic tilt Automatic tilt range narrow with Auto Tilt keyAutomatic tilt range wide with Auto Tilt key Auto tilt concept Case 2 Tilt angle 10 to Relation between bottom echo and tilt angleCase 1 Tilt angle 30 to Case 3 Tilt angle 0 to Tilt angle for surface fish Tilt angle Suitable tilt angle Tilt angle and beam coverage Measuring Range and Bearing to a Target Location of trackball data Eliminating Weak Echoes Principle of TVG Numeric data entry dialog box Adjust AGC Suppressing Bottom Tail Adjust 2nd AGC Decrease pulse length Adjust Near AGC Fish echo Rejecting Sonar Interference and Noise Identifying noise sourceInterference rejector Changing Tx interval Shifting Tx frequencyHow TX Interval works Echo average Setting reference bearing for frequency changeNoise limiter Reverberation reduction Sidelobe suppression Adjusting Beamwidth Target Lock menu Tracking a Fish School target lockSelecting target lock type Target lock type dialog box Fish school tracking mode Target lock mark and target lock data Position tracking mode How position tracking mode target lock works Target Lock menu Detecting Fish Schools Aurally Selecting directionRange and audio bearing marks Alarm & Audio menu Selecting audio sectorAudio sector dialog box Automatic training ReverberationIndications related to automatic training Presentation modes Presentation ModePresentation mode description Automatic return of own ship mark in true motion How to select a presentation mode Display Setup menuPresentation mode dialog box Fish Alarm Fish alarm status dialog box How to set the fish alarm zone How to create desired alarm zone How to use offcenter Relocating Fish School for Easy Observation Comparing Fish School Concentration Estimate marks and their data How to measure fish school speed Measuring Fish School SpeedEntering fish marks Deleting fish marks with the Delete Mark key Deleting fish marksFish mark Deleting fish marks through the menu Event Mark, Own Ship Position Mark Entering an event markEvent mark data Entering an own ship position mark Deleting an event mark, own ship position markEvent mark description Deleting event marks, own ship position mark from the menu Net Course Mark Inscribing the net course markNet course mark Observing Net Behavior Net behavior Storing the picture PRESET, Memory Card menuStoring, Recalling Picture Recalling stored picture Others Menu Displaying the Others menu Color Setting menu Others menu description Color response curve TVG setting window Interpreting the Horizontal Display Bottom echoesBottom echoes Fish schools Fish schools Sea surface reflections Sea surface reflectionsWake Wake Sidelobe echoes false echoes Noise and interferenceNoise and interference Vertical Mode Vertical mode concept Vertical Mode ConceptSetting the vertical display Overview Vertical Mode Indications and Marks Typical vertical displayVertical 1 display indications and markers Vertical bearing mark, tilt mark Solid Line Dashed LineVertical scan and horizontal scan ranges Auto Train Trackball mark position reference markAuto train Measuring the Range Measuring range with the trackball Select V-SCAN Setting and press the Menu key TVG setting dialog box Vertical Mode Suppressing Bottom Tail Adjust 2nd AGC Rejecting Interference and Noise Noise limiter Suppressing sidelobes Dialog box Vertical Expansion Display Vertical 1 expansion display Gain Control Wide Beamwidth Others menu description Setting window Display size Tracking Application to Bonito and Tuna FishingSearching Approaching Catching Catching Slant Mode Slant mode single display Sensor Slant mode combination display Dialog box for setting slant combination display H1 display Slant display NUMERIC/ Graphic Data Display Display Range Tilt Angle Automatic tilt Auto tilt concept Auto Training Eliminating Weak Echoes Scan Setting menu Suppressing Bottom Tail Decrease pulse length Adjust Near AGC Fish echo Rejecting Sonar Interference and Noise Changing Tx interval Noise limiter Adjusting Beamwidth Tracking a Fish School target lock Fish school tracking mode Position tracking mode Target Lock menu Detecting Fish Schools Aurally Selecting audio sector Offcenter Manual offcenter Automatic offcenter Fish Alarm How to set the fish alarm zone Numeric Measuring Fish School Speed Deleting fish marks Event Mark, Own Ship Position Mark Entering an own ship position mark Erase Marks menu Net Course Mark 21˚ Others sub menu Others menu description Scan Color TVG setting window Interpreting the Slant Display Surface fish school Bottom fish school Sea surface reflections False echo by sidelobe This page intentionally left blank Echo Sounder Mode Indications and markers on the echo sounder 1 display Typical Echo Sounder DisplaysEcho sounder 1 display Trackball mark position reference mark Echo sounder 2 net recorder or echo sounder display Downward-looking net recorder display Echo sounder combination mode ES1 + ES2 Echo sounder + net recorder displayEcho sounder combination display Upward + downward looking net recorder display ES2 mode Echo Sounder 2 display Upward + downward looking display Selecting an Echo Sounder Mode Enabling an echo sounder modeDisplay mode dialog box System menu setting and available displays Echo sounder mode configurations and menu setting ES1 SETTING, ES2 Setting menus Selecting Display RangeRange and display shift concept Dialog box for setting numeric data Range dialog box ES1 Setting and ES2 Setting menus Picture Advance Speed Picture advance speed dialog box Measuring Depth, Distance Estimating fish concentration with estimate marks Fish histogram Fish histogram ES1 Setting Menu Overview ES1 Setting menuES1 setting menu description 10 ES2 Setting Menu Overview ES2 Setting menu net recorder connectedES2 Setting menu description History Mode History mode concept Sample History Display How to Interpret, Set the History Display How to interpret the history displayInterpreting the history display Setting the history marker Slant range and tilt angle Setting the width of the history marker Horizontal slice width dialog box Setting the picture advance mode NUMERIC/GRAPHIC Data Display Full Numeric/Graphic Data DisplayFull Numeric/graphic data display Abbreviated Numeric/Graphic Data Display Abbreviated Numeric/graphic display Numeric/Graphic Data Description Numeric/graphic data descriptionOn next Numeric/graphic data description con’t. from previous Deleting items from user menu Customizing the EquipmentUser Menu Main menu user menu Programming the user menu Message for registration of user menu item Executing a function Example default function programsFunction Keys F1-F6 Function dialog box for storing picture Function dialog box for recalling picture Dialog box for selection of presentation modeDialog box for adjustment of panel dimmer Function dialog box for erasing fish marks Programming function keys Dialog box for erase ship trackConfirmation for registering function key Erasing programs Function key dialog box User Prog Control Selecting a user programProgramming the User Prog control User program options This page intentionally left blank Others Menu Erase Marks menu Display Setting menu description Display Setting menuOpening the Display Setting menu Display Settng menu Tilt Alarm & Audio menu Opening the Alarm & Audio menuAlarm & Audio menu description PRESET, Memory Card menu Opening the PRESET, Memory Card menuPRESET, Memory Card menu description Initial Setting menu description Initial Setting menuOpening the Initial Setting menu Mark Display menu Heading mark Range ringsBearing scale Data on ship’s track Net movement plotFish marks connected with line Target lock mark Mark Size menuMark Size menu Others Menu Data Display menu Data Display menu Current flow direction settings Current VEC & Wind menuCurrent VEC & Wind menu NET Sonde Setting menu Xmtr Distance setting windowNET Sonde Settng menu NET Shoot Setting menu NET Shoot Setting menuDepth Display menu Stabilization menu Stabilization menuTest menu Initialization menu Initialization menuTime offset dialog box 10-1 Storing Image, ConfigurationMemory Card Operations Processor unit 10-2 Memory Card menu Loading, Deleting Files 10-3Memory Card menu, recall, delete dialog box opened Formatting Memory Cards 10-4 Cleaning the equipment MAINTENANCE, TroubleshootingPreventive Maintenance 11-1 Hull Unit Maintenance Hull unit maintenance11-2 Unit and fuse Fuse Replacement11-3 Unit Fuse rating Symptom Check, Remedy TroubleshootingTroubleshooting 11-4 11-5 Error messagesMessage Meaning, Remedy Power supply Transducer Error code Error CodesError messages con’t from previous 11-6 Test menu Status MessagesTests 11-7 Board test 11-8Board test results 11-9 Interpreting the board test results Panel test Panel test11-10 Trackball check Lever check Test pattern 11-11Test patterns 11-12 Rx test For service technicianNoise test For service technician Rx test sequence, Rx test message 11-13 Raising the Transducer from the Hull UnitRaising the transducer automatically Raise/lower control box, cover removed Raising the transducer manually 11-14 Menu Tree AP-1 AP-2 Appendix AP-3 Xmtr Distance AP-4 Tilt Interlock OFF, on Specifications of the Color Scanning Sonar FSV-84 Transceiver Unit Power Supply Index IN-1 IN-2 Indications IN-3 OFF Center key Offcentering Vertical mode Smoothing IN-4 IN-5 V1/S, V2 keys