Furuno FSV-84 User Prog Control, Selecting a user program, Programming the User Prog control

8. CUSTOMIZING THE EQUIPMENT

8.3USER PROG Control

The [USER PROG] control provides for instant setup of the equipment according to fishing ground or target fish. Ten programs may be set up, and vertical and horizontal display settings may be programmed together or individually. (The default settings programs them together.) For how to program them individually see your dealer.

8.3.1Selecting a user program

Rotate the [USER PROG] control clockwise or counterclockwise to select program desired. Selected program no. appears at the top right-hand corner of the screen to the right of “P”. If the equipment is turned off with a user program active, it starts up with those settings at the next power on.

8.3.2Programming the USER PROG control

1.Set the equipment as desired. You can set up all items on the H-SCAN SETTING and V-SCAN SETTING menus as desired.

2.Press the [MENU] key to open the menu.

3.Select OTHERS and press the [MENU] key.

4.Select PRESET, MEMORY CARD and press the [MENU] key. One of the following menus appears depending on the setting of “SELECT USER PROG” on the MISC menu of the SYSTEM menu. (For SYSTEM menu, contact your dealer or refer to installation manual.)

MENU	QUIT
OTHERS	QUIT
PRESET, MEMORY CARD	QUIT

ASSIGN USER PROG...

CLEAR F-KEY SETTING...

H/S-SCAN RANGE
V-SCAN RANGE
PICTURE SHOT	: EXECUTE
PICTURE RECALL	: EXECUTE
MEMORY CARD...

MENU	QUIT
OTHERS	QUIT
PRESET, MEMORY CARD	QUIT

ASSIGN USER PROG-H...

ASSIGN USER PROG-V...

CLEAR F-KEY SETTING
H/S-SCAN RANGE
V-SCAN RANGE
PICTURE SHOT	: EXECUTE
PICTURE RECALL	: EXECUTE
MEMORY CARD...

User program set jointly for horizontal and vertical displays

User program set individually for horizontal and vertical displays

PRESET, MEMORY CARD menu

5.Select ASSIGN USER PROG, ASSIGN USER PROG-H/S or ASSIGN USER PROG-V as appropriate and press the [MENU] key.

8-8