Furuno FSV-84 manual Error Codes, 11-6, Error messages con’t from previous, Error code

11. MAINTENANCE, TROUBLESHOOTING

Error messages (con’t from previous page)

Message	Meaning, Remedy
Hull unit, transducer (con’t)
WARNING!!	This message blinks at the screen center and
TRANSDUCER IS KEPT AT WRONG	the buzzer sounds when the transducer is
POSITION. SET BACK TRANSDUCER	knocked out of position in any aspect of its
POSITION TO NORMAL BY USING ↑ OR ↓	operation. Try to return the transducer to its
KEY. PRESS [R/B] KEY TO TURN OFF	normal position by operating the [↑] or [↓]
ALARM.	key and silence the buzzer with the [R/B
	AUDIO] key.
WARNING!!	This message blinks at the screen center and
TRANSDUCER IS KEPT EXTENDED. MAX	the buzzer sounds when the transducer is
ALLOWABLE SPEED FOR EXTENDED	extended and ship’s speed, input by external
TRANSDUCER IS 18 KT. PRESS [R/B] KEY	equipment, exceeds 18 kts. Silence the
TO TURN OFF ALARM.	buzzer with the [R/B AUDIO] key and lower
	ship’s speed.
WARNING!!	This message blinks at the screen center and
MAX ALLOWABLE SPEED DURING	the buzzer sounds when the transducer is
RAISING/LOWERING TRANSDUCER IS 15	raised/lowered and ship’s speed, input by
KT. PRESS [R/B] KEY TO TURN OFF	external equipment, exceeds 15 kts. Silence
ALARM.	the buzzer with the [R/B AUDIO] key and
	lower ship’s speed.

11.6Error Codes

The equipment displays a (blinking) three-digit error code at the bottom of the display when it detects internal trouble. In case of multiple error, error codes appear in numerical order and the maximum number of codes displayable is five. The codes remain on the screen until the corresponding trouble is fixed, and a buzzer sounds each time a new error code is added to the on-screen error code display. For any error code, report error code number to your dealer.

* * * Error Code * * * #003, #006, #108

Error code

11-6