1. OPERATIONAL OVERVIEW

1.6Display Mode, Display Division

This sonar provides a total of ten display mode selections: Horizontal, Horizontal2, S, S combination, Vertical1, Vertical1, Vertical2, Vertical1 + ES1 (echo sounder), Vertical 1 + ES2 (net recorder), History, ES1, ES2, and ES1 + ES2. The user may preset as many modes as desired and select one with the [MODE] key.

1.6.1Selecting a display mode

Press the [MODE] key several times until the desired display appears. The default modes are Horizontal, Horizontal1 + Horizontal2, Vertical1, Vertical 1 + Vertical 2, and History. You can program the [MODE] key to show any or all of the modes mentioned above. For further details, see DISPLAY MODE on page 9-2.

Note that the [MODE] key may be programmed to show a pull-down menu instead. For further details, see MODE SELECTION on page 9-2. In this case the procedure for mode selection is as follows:

1. Press the [MODE] key. The following pull-down menu appears.

H1

S

H1&H2

H$S

V1

V1&V2

V1&ES1

V1&ES2

HISTORY

ES1

ES2

ES1&ES2

H1

H1&H2

V1

V1&V2

HISTORY

Default setting

All modes enabled

Mode selection menus

2.Use the trackball to select display mode desired.

3.Press the [MENU] key to display the selected mode.

1-6

Page 22
Image 22
Furuno FSV-84 manual Display Mode, Display Division, Selecting a display mode, Mode selection menus