Furuno FSV-84 manual Display Setting menu, Dialog box for setting numeric value

1. OPERATIONAL OVERVIEW

3. Use the trackball to select DISPLAY SETTING and press the [MENU] key.

MENU		QUIT
OTHERS		QUIT
DISPLAY SETTING		QUIT
DISPLAY MODE...
MODE SELECTION	: MODE KEY
TX/RX MODE	: ALTERNATIVE
H2/S DISPLAY	: LANDSCAPE
PRESENTATION MODE	: HEAD UP
TM DISPLAY RANGE	: 1.6R
BEARING REF	: SHIP HEADING
TILT LEVER	: TILT
S AUTO OFF CENTER	: OFF
H-SLICE WIDTH	: 16
H-SLICE PICT ADVC	: KP SYNC
NET COURSE MARK	: ENTER
MANUAL DEGAUSS	: EXECUTE
AUTO DEGAUSS	: INT SENSOR
DIMMER	: 10
KEY BEEP VOLUME	: 5

DISPLAY SETTING menu

4.Select DIMMER with the trackball and press the [MENU] key to open the dialog box.

QUIT

CANCEL

DIALOG BOX FOR SETTING NUMERIC DATA

Select (raise setting) or (lower setting) with the trackball and press [MENU] key to change setting. Select QUIT to finish; CANCEL to cancel operation.

Dialog box for setting numeric value

5.Select S (raise setting) or T (lower setting) with the trackball.

6.Press the [MENU] key to change the setting.

7.Select QUIT with the trackball and press the [MENU] key.

8.Select QUIT at the top of the menu screen and press the [MENU] key to close all menus.

1-5