Furuno FSV-84 manual Programming the user menu, Display Setting menu

8. CUSTOMIZING THE EQUIPMENT

8.1.2Programming the user menu

The procedure below shows you how to add the menu item PRESENTATION MODE (for selecting presentation mode) to the user menu. Not all menu items may be programmed to the user menu. See the menu tree on page AP-1 to AP-4 for items which can be programmed. The order of items in the USER menu cannot be changed.

1.Press the [MENU] key to open the main menu.

2.Select OTHERS and press the [MENU] key.

3.Select DISPLAY SETTING and press the [MENU] key.

MENU		QUIT
OTHERS		QUIT
DISPLAY SETTING		QUIT
DISPLAY MODE...
MODE SELECTION	: MODE KEY
TX/RX MODE	: ALTERNATIVE
H2/S DISPLAY	: LANDSCAPE
PRESENTATION MODE	: HEAD UP
TM DISPLAY RANGE	: 1.6R
BEARING REF	: SHIP HEADING
TILT LEVER	: TILT
S AUTO OFF CENTER	: OFF
H-SLICE WIDTH	: 16
H-SLICE PICT ADVC	: KP SYNC
NET COURSE MARK	: ENTER
MANUAL DEGAUSS	: EXECUTE
AUTO DEGAUSS	: INT SENSOR
DIMMER	: 10
KEY BEEP VOLUME	: 5

DISPLAY SETTING menu

4.Select PRESENTATION MODE and press the [MENU] key for more than one second. The dialog box appears.

QUIT

CANCEL

HEAD UP

NORTH UP

COURSE UP

TRUE MOTION

Presentation mode dialog box

8-2