Changing each setting in PW SNR mode | Toshiba IK-TF9U specification

(1. 3. 3) Changing each setting in PW SNR mode

	Move up down	Set by pushing
	By pushing
		DATA UP, DOWN
	MENU UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	PW SNR
TRG.P
PART	OFF

<MODE = E.TRG E.TRG = PW SNR>

•Sutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

•Input trigger pulse setting at PW SNR and PW SR

Input trigger pulse : positive polarity

Input trigger pulse : negative polarity

•Partial scanning switch OFF/25fps/30fps/35fps/40fps/45fps/50fps/ E25fps/E30fps/E35fps/E40fps/E45fps/E50fps

(a) Changing the polarity of inputting trigger pulse setting

1Set the "→" to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either , by pushing [DATA UP], [DATA DOWN] buttons.

(b) Changing the partial scanning setting

1Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select the mode by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

17

Image 17

Toshiba IK-TF9U instruction manual Changing each setting in PW SNR mode, Mode = E.TRG E.TRG = PW SNR

Contents

Following information is only for EU-member states IK-TF9U Safety Precautions Disclaimer Table of Contents Components Names and Functions Standard Connection Connector Pin AssignmentsConnection White Balance OperationAutomatic Black Balance Temp LOW Result displayed Meaning Available selections Items Controlled by Using on Screen Display Using the Menus Mode Setting by on Screen Display Shutter Electronic shutter MenusFlicker may be large TRG Mode = Manual Changing each setting in Manu modePartial scanning setting Menu UP, Down Changing the shutter speed setting Changing each setting in SS synchro. scan modeMode = SS Changing each setting in 1P SNR mode Changing each setting in E.TRG modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time setting Mode = E.TRG E.TRG = 1P SR Changing each setting in 1P SR modeChanging 1P SR exposure time setting 1P SNR, 1P SR, PW SNR, PW SR Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = RR Changing each setting in PW SR modeMode = E.TRG E.TRG = PW SR Gain Video gain Changing each setting in GainChanging the gain in Manu mode WHT BAL White balance Changing gamma correction MANU/OFFChanging master pedestal Changing R pedestal Option Sync Setting to factory setting status Setting by the frameSetting by 2H Synchro. Scan Operation 1 Pulse Trigger SYNC-NON Reset Picture Output Timing 1P SNR 1 Pulse Trigger Sync Non ResetE. TRG External trigger Fval Lval Dval 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync Reset Pulse Width Trigger SYNC-NON Reset Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESET Long Term Exposure RR Reset restartInput Timing Chart Example Partial Read When Partial Scanning Mode is onPartial Scanning OFF All pixels scanning Partial Scanning on Using the unit with external sync signal External sync signal polarityExternal Sync External sync frequency range Horizontal Output Waveform Timing Chart Output Waveform Timing ChartVertical Output Waveform Timing Chart Fval LVAL、 Dval RGB, 3CCD Specifications Symptom Items to be checked External Appearance DiagramBefore Making a Service Call One 1 Year Limited Warranty of Labor and Parts Limited Warranty Toshiba CCD CameraHow to Obtain Warranty Service Step-By-Step Procedures Your Responsibilities