PW SR Pulse width trigger SYNC-RESET | Toshiba IK-TF9U specification

( 4 ) PW SR (Pulse width trigger SYNC-RESET)

The trigger input to the CC1 of the DIGITAL terminal develops 1 frame images.

(4. 1) 1 Pulse Width Trigger SYNC-RESET Picture Output Timing

Negative polarity mode

Trigger*1

Positive polarity mode

About 1 ∝s	About 7 ∝s
	Exposure period*2
Exposure completion
	0 to 2H

(Internal VD)*3

RGB data (video interval image)

FVAL

LVAL,

DVAL

58H (Partial scanning OFF)

40H (Partial scanning 25fps)

56H (Partial scanning 30fps)

66H (Partial scanning 35fps)

78H (Partial scanning 40fps)

80H (Partial scanning 45fps)

86H (Partial scanning 50fps)

*1: Externally input signal

*2: Exposure time = Trigger pulse width + 6 ∝s

(Valid trigger pulse width is 2 ∝s or greater for external trigger shutter operation.)

*3: VD is generated after 0 to 2H following the completion of the exposure period and the video is synchro- nized to this and output.

Note:

When the next trigger is input before completion of the output of the video corresponding to the trig- ger, there will be an effect on the video.

27

Image 27

Toshiba IK-TF9U PW SR Pulse width trigger SYNC-RESET, Pulse Width Trigger SYNC-RESET Picture Output Timing

Contents

Following information is only for EU-member states IK-TF9U Safety Precautions Disclaimer Table of Contents Components Names and Functions Connector Pin Assignments ConnectionStandard Connection Operation Automatic Black BalanceWhite Balance Temp LOW Result displayed Meaning Available selections Items Controlled by Using on Screen Display Using the Menus Mode Setting by on Screen Display TRG MenusShutter Electronic shutter Flicker may be large Menu UP, Down Changing each setting in Manu modeMode = Manual Partial scanning setting Changing each setting in SS synchro. scan mode Mode = SSChanging the shutter speed setting Changing 1P SNR exposure time setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing the polarity of inputting trigger pulse setting 1P SNR, 1P SR, PW SNR, PW SR Changing each setting in 1P SR modeMode = E.TRG E.TRG = 1P SR Changing 1P SR exposure time setting Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR mode Changing each setting in PW SR mode Mode = E.TRG E.TRG = PW SRMode = E.TRG E.TRG = RR Changing each setting in Gain Changing the gain in Manu modeGain Video gain WHT BAL White balance Changing R pedestal MANU/OFFChanging gamma correction Changing master pedestal Option Sync Synchro. Scan Operation Setting by the frameSetting to factory setting status Setting by 2H Fval Lval Dval 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing E. TRG External trigger 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync Reset Pulse Width Trigger SYNC-NON Reset Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESET RR Reset restart Input Timing Chart ExampleLong Term Exposure Partial Scanning on When Partial Scanning Mode is onPartial Read Partial Scanning OFF All pixels scanning External sync frequency range External sync signal polarityUsing the unit with external sync signal External Sync Fval LVAL、 Dval Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Vertical Output Waveform Timing Chart RGB, 3CCD Specifications External Appearance Diagram Before Making a Service CallSymptom Items to be checked Your Responsibilities Limited Warranty Toshiba CCD CameraOne 1 Year Limited Warranty of Labor and Parts How to Obtain Warranty Service Step-By-Step Procedures