( 3 ) PW SNR (Pulse width trigger SYNC-NON RESET)
The trigger input to CC1 of the DIGITAL terminal develops 1 frame images.
(3. 1) Pulse Width Trigger SYNC-NON RESET Picture Output Timing
Negative polarity mode
Trigger*1
Positive polarity mode
About 1 ∝s | About 7 ∝s |
|
| Exposure period*2 | Exposure period*2 |
(Internal VD)
RGB data (video interval image)
FVAL
LVAL,
DVAL
| 58H | (Partial scanning OFF) | The internal VD falling edge is within the |
| 40H | (Partial scanning 25fps) | |
| exposure period and thus video is not output.*3 | ||
| 56H | (Partial scanning 30fps) | |
|
| ||
| 66H | (Partial scanning 35fps) |
|
| 78H | (Partial scanning 40fps) |
|
| 80H | (Partial scanning 45fps) |
|
| 86H | (Partial scanning 50fps) |
|
*1: | Externally input signal |
|
|
*2: | Exposure time = Trigger pulse width + 6 ∝s |
| |
| (Valid trigger pulse width is 2 ∝s or greater for external trigger shutter operation.) | ||
*3: Video is output at the falling edge of the internal VD following completion of the exposure period. The video and FVAL/LVAL/DVAL have a paired relationship.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trig- ger, there will be an effect on the video.
26
