Changing each setting in SS synchro. scan mode | Toshiba IK-TF9U

(1. 2) Changing each setting in SS (synchro. scan) mode

	Move up down	Set by pushing
	By pushing
		DATA UP, DOWN
	MENU UP, DOWN

-- SHUTTER --
MODE	SS
SS	OFF
PART	OFF

<MODE = SS>

(a) Changing the shutter speed setting

•Sutter mode MANU, SS, E.TRG

•Synchro. scanning setting

OFF : 2H/1592H ∼ 1590H/1592H↔OFF↔2FRM↔512FRM

30fps, E.30fps : 2H/1060H ∼ 1058H/1060H↔OFF↔2FRM↔512FRM

40fps, E.40fps : 2H/774H↔772H/774H↔OFF↔2FRM↔512FRM

•Partial scanning switch OFF/25fps/30fps/35fps/40fps/45fps/50fps/ E25fps/E30fps/E35fps/E40fps/E45fps/E50fps

1Set the "→" to SS by pushing [MENU UP], [MENU DOWN] buttons.

2Select the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.

(b) Partial scanning setting

1Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select either the mode by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The slow shutter speed may increase the fixed pattern noise and/or the white pixels. This is a charac- teristic of CCD, and is not a symptom of malfunction.

14

Image 14

Toshiba IK-TF9U Changing each setting in SS synchro. scan mode, Mode = SS, Changing the shutter speed setting

Contents

IK-TF9U Following information is only for EU-member states Safety Precautions Disclaimer Table of Contents Components Names and Functions Standard Connection Connector Pin AssignmentsConnection White Balance OperationAutomatic Black Balance Result displayed Meaning Temp LOW Items Controlled by Using on Screen Display Available selections Mode Setting by on Screen Display Using the Menus Flicker may be large MenusShutter Electronic shutter TRG Partial scanning setting Changing each setting in Manu modeMode = Manual Menu UP, Down Changing the shutter speed setting Changing each setting in SS synchro. scan modeMode = SS Changing the polarity of inputting trigger pulse setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing 1P SNR exposure time setting Changing 1P SR exposure time setting Changing each setting in 1P SR modeMode = E.TRG E.TRG = 1P SR 1P SNR, 1P SR, PW SNR, PW SR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNR Mode = E.TRG E.TRG = RR Changing each setting in PW SR modeMode = E.TRG E.TRG = PW SR Gain Video gain Changing each setting in GainChanging the gain in Manu mode WHT BAL White balance Changing master pedestal MANU/OFFChanging gamma correction Changing R pedestal Sync Option Setting by 2H Setting by the frameSetting to factory setting status Synchro. Scan Operation E. TRG External trigger 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing Fval Lval Dval 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset Pulse Width Trigger SYNC-NON Reset Picture Output Timing PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output Timing Long Term Exposure RR Reset restartInput Timing Chart Example Partial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Read Partial Scanning on External Sync External sync signal polarityUsing the unit with external sync signal External sync frequency range Vertical Output Waveform Timing Chart Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Fval LVAL、 Dval Specifications RGB, 3CCD Symptom Items to be checked External Appearance DiagramBefore Making a Service Call How to Obtain Warranty Service Step-By-Step Procedures Limited Warranty Toshiba CCD CameraOne 1 Year Limited Warranty of Labor and Parts Your Responsibilities