Changing each setting in Manu mode, Menu UP, Down

(1. 1) Changing each setting in MANU mode

	Move up down	Set by pushing
	By pushing
		DATA UP, DOWN
	MENU UP, DOWN

-- SHUTTER --
MODE	MANU
MANU	100
PART	OFF

<MODE = MANUAL>

(a) Changing the shutter speed

•Sutter mode MANU, SS, E.TRG

•Sutter speed setting

OFF, 100 (1/100s), 250 (1/250s), 500 (1/500s) 1000 (1/1000s), 2000 (1/2000s), 4000 (1/4000s) 10000 (1/10000s), 25000 (1/25000s)

50000 (1/50000s)100000 (1/100000s)

•Partial scanning switch OFF/25fps/30fps/35fps/40fps/45fps/50fps/ E25fps/E30fps/E35fps/E40fps/E45fps/E50fps

1Set the "→" to MANU by pushing [MENU UP], [MENU DOWN] buttons.

2Set the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.

(b) Partial scanning setting

1Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select the mode by pushing [DATA UP], [DATA DOWN] buttons.

Page 13

Image 13

Toshiba IK-TF9U Changing each setting in Manu mode, Menu UP, Down, Mode = Manual, Changing the shutter speed

Contents

Following information is only for EU-member states IK-TF9U Safety Precautions Disclaimer Table of Contents Components Names and Functions Connection Connector Pin AssignmentsStandard Connection Automatic Black Balance OperationWhite Balance Temp LOW Result displayed Meaning Available selections Items Controlled by Using on Screen Display Using the Menus Mode Setting by on Screen Display Shutter Electronic shutter MenusFlicker may be large TRG Mode = Manual Changing each setting in Manu modePartial scanning setting Menu UP, Down Mode = SS Changing each setting in SS synchro. scan modeChanging the shutter speed setting Changing each setting in 1P SNR mode Changing each setting in E.TRG modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time setting Mode = E.TRG E.TRG = 1P SR Changing each setting in 1P SR modeChanging 1P SR exposure time setting 1P SNR, 1P SR, PW SNR, PW SR Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SR Changing each setting in PW SR modeMode = E.TRG E.TRG = RR Changing the gain in Manu mode Changing each setting in GainGain Video gain WHT BAL White balance Changing gamma correction MANU/OFFChanging master pedestal Changing R pedestal Option Sync Setting to factory setting status Setting by the frameSetting by 2H Synchro. Scan Operation 1 Pulse Trigger SYNC-NON Reset Picture Output Timing 1P SNR 1 Pulse Trigger Sync Non ResetE. TRG External trigger Fval Lval Dval 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync Reset Pulse Width Trigger SYNC-NON Reset Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESET Input Timing Chart Example RR Reset restartLong Term Exposure Partial Read When Partial Scanning Mode is onPartial Scanning OFF All pixels scanning Partial Scanning on Using the unit with external sync signal External sync signal polarityExternal Sync External sync frequency range Horizontal Output Waveform Timing Chart Output Waveform Timing ChartVertical Output Waveform Timing Chart Fval LVAL、 Dval RGB, 3CCD Specifications Before Making a Service Call External Appearance DiagramSymptom Items to be checked One 1 Year Limited Warranty of Labor and Parts Limited Warranty Toshiba CCD CameraHow to Obtain Warranty Service Step-By-Step Procedures Your Responsibilities

(1. 1) Changing each setting in MANU mode

MENU UP, DOWN

<MODE = MANUAL>

(a) Changing the shutter speed

(b) Partial scanning setting