Toshiba IK-TF9U ( 6 ) OPTION, ( 5 ) SYNC

22

• Serial baud rate 9600, 19200

-- OPTION --

BAUD RATE

9600

Move up down

By pushing

MENU UP, DOWN

Set by pushing

DATA UP, DOWN

(4. 5) Changing the shading correction mode

1Set the "→" to SHAD. by pushing [MENU UP], [MENU DOWN] buttons.

2Set the SHAD. by pushing [DATA UP], [DATA DOWN] buttons.

Note: The alignment value for shading is fixed to "0" when selecting SHAD. OFF. MANU is not dis-

played in the menu.

(4. 6) Changing the manual shading correction setting

1Set the "→" to MANU by pushing [MENU UP], [MENU DOWN] buttons.

2Set the MANUAL SHADING by pushing [DATA UP], [DATA DOWN] buttons.

( 6 ) OPTION

(6. 1) Changing serial communication baud rate

1Set the "→" to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.

2Select either 9600 or 19200 by pushing [DATA UP], [DATA DOWN] buttons.

• H PHASE -100 to 100

• Sync system display

-- SYNC --

MODE EXT

H PHASE

0

Move up down

By pushing

MENU UP, DOWN

Set by pushing

DATA UP, DOWN

(5. 1) Adjusting horizontal phase

1Set the "→" to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.

2Adjust the horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.

( 5 ) SYNC

When an external sync signal is input, the display menu changes from INT (internal sync) to EXT (external

sync) automatically.

Contents

Main CAMERA CONTROL UNIT IK-TF9U INSTRUCTION MANUAL SAFETY PRECAUTIONS Safety icons Disclaimer Limitation of Usage Protection of Personal Information TABLE OF CONTENTS Copyright and Right of Portrait 1. CAUTIONS ON USE AND INSTALLATION This product is 3CCD color camera with digital video output. 2. COMPONENTS 3. NAMES AND FUNCTIONS 4. CONNECTION 4. 1 Standard Connection 4. 3 Connector Pin Assignments 4. 2 Cautions on Connection 5. OPERATION 5. 1Automatic Black Balance 5. 2 White Balance Page 6. ITEMS CONTROLLED BY USING ON SCREEN DISPLAY 7. MODE SETTING BY ON SCREEN DISPLAY 7. 1 Using the Menus 7. 2 Menus ( 1 ) SHUTTER (Electronic shutter) Page Page Page Page Page Page ( 2 ) GAIN (Video gain) ( 3 ) WHT BAL (White balance) ( 4 ) PROCESS ( 6 ) OPTION ( 5 ) SYNC 7. 3 Synchro. Scan Operation ( 1 ) Setting by 2H ( 2 ) Setting by the frame ( 7 ) Setting to factory setting status 7. 4E. TRG (External trigger) ( 1 ) 1P SNR (1 Pulse Trigger Sync Non Reset) ( 2 ) 1P SR (1 Pulse Trigger Sync Reset) ( 3 ) PW SNR (Pulse width trigger SYNC-NON RESET) ( 4 ) PW SR (Pulse width trigger SYNC-RESET) ( 5 ) RR (Reset restart) 7. 5Partial Read ( 3 )When Partial Scanning Mode is ON Blanking interval B Blanking interval DTotal A Video interval C 7. 6 External Sync ( 1 ) External sync signal polarity ( 2 ) External sync frequency range ( 3 ) Using the unit with external sync signal 8. OUTPUT WAVEFORM TIMING CHART ( 1 ) Horizontal Output Waveform Timing Chart ( 2 ) Vertical Output Waveform Timing Chart 1536H RGB data 9. SPECIFICATIONS The designs and specifications are subject to change without notice. 11. BEFORE MAKING A SERVICE CALL 10. EXTERNAL APPEARANCE DIAGRAM Limited Warranty TOSHIBA CCD Camera Copyright 2007 Toshiba America, Inc. All rights resered.