Specifications, RGB, 3CCD | Toshiba IK-TF9U specification

9. SPECIFICATIONS

Power supply	12V DC±10%
Power consumption	Approx. 5.4W
Pick-up system	RGB, 3CCD
Image sensor	1/3inch All pixels CCD
	(Effective pixels Horizontal : 1034, Vertical : 779)
Scanning System	Progressive scan
Video output pixels	Horizontal pixels : 2048, Vertical : 1536
Pixel clock frequency	80.8736MHz
Sync signal frequency	Horizotal : 31.84KHz, Vertical : 20Hz
Sync system	Internal
Sensitivity	F8 standard (2000 lx, 3000K)
Minimum illumination	10 lx (F2.2, Sensitivity + 18 dB, 3000K)
Lens mount	C mount (flange back : 17.526 mm in-air)
Ambient temperature	32 to 104°F (0 to 40°C)
Ambient humidity	Less than 90%
Weight	Approx. 0.353lbs (160g)
External dimension	1.73” (W) x 1.73” (H) x 3.07” (D)
	(44 (W) x 44 (H) x 78 (D) mm)	(except for protruded portion)
White balance	AWB (Automatic white balance), MANUAL (Manual)
Gain	MANUAL (Manual), OFF (0 dB)
Partial scanning	25fps, 30fps, 35fps, 40fps, 45fps, 50fps
Output signal	8-bit RGB, Digital output (Camera Link format)
Sync signal output	FVAL, LVAL, DVAL (Positive polarity)
	Pixel Clock
External trigger input	CC1 (LVDS input), More than 2 ∝s pulse width
Partial scanning control	CC2 (LVDS input)
signal input
Interface	Serial data interface : Ser TC (RXD), Ser TFG (TXD)
Optional parts	IK-TF9H (CAMERA HEAD) EXC-CL05S (Cable), etc

The designs and specifications are subject to change without notice.

32

Image 32

Toshiba IK-TF9U instruction manual Specifications, RGB, 3CCD

Contents

IK-TF9U Following information is only for EU-member states Safety Precautions Disclaimer Table of Contents Components Names and Functions Standard Connection Connector Pin AssignmentsConnection White Balance OperationAutomatic Black Balance Result displayed Meaning Temp LOW Items Controlled by Using on Screen Display Available selections Mode Setting by on Screen Display Using the Menus Menus Shutter Electronic shutterFlicker may be large TRG Changing each setting in Manu mode Mode = ManualPartial scanning setting Menu UP, Down Changing the shutter speed setting Changing each setting in SS synchro. scan modeMode = SS Changing each setting in E.TRG mode Changing each setting in 1P SNR modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time setting Changing each setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting 1P SNR, 1P SR, PW SNR, PW SR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNR Mode = E.TRG E.TRG = RR Changing each setting in PW SR modeMode = E.TRG E.TRG = PW SR Gain Video gain Changing each setting in GainChanging the gain in Manu mode WHT BAL White balance MANU/OFF Changing gamma correctionChanging master pedestal Changing R pedestal Sync Option Setting by the frame Setting to factory setting statusSetting by 2H Synchro. Scan Operation 1P SNR 1 Pulse Trigger Sync Non Reset 1 Pulse Trigger SYNC-NON Reset Picture Output TimingE. TRG External trigger Fval Lval Dval 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset Pulse Width Trigger SYNC-NON Reset Picture Output Timing PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output Timing Long Term Exposure RR Reset restartInput Timing Chart Example When Partial Scanning Mode is on Partial ReadPartial Scanning OFF All pixels scanning Partial Scanning on External sync signal polarity Using the unit with external sync signalExternal Sync External sync frequency range Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart Fval LVAL、 Dval Specifications RGB, 3CCD Symptom Items to be checked External Appearance DiagramBefore Making a Service Call Limited Warranty Toshiba CCD Camera One 1 Year Limited Warranty of Labor and PartsHow to Obtain Warranty Service Step-By-Step Procedures Your Responsibilities