25
About 1 ยตs
Exposure completion
0 to 2H*3
Exposure period*2
Trigger*1
Negative polarity mode
Positive polarity mode
(Internal VD)
RGB data
(video interval image)
FVAL
LVAL,
DVAL
58H (
Partial scanning OFF
)
40H (
Partial scanning
25fps)
56H (
Partial scanning
30fps)
66H (
Partial scanning
35fps)
78H (
Partial scanning
40fps)
80H (
Partial scanning
45fps)
86H (
Partial scanning
50fps)
( 2 ) 1P SR (1 Pulse Trigger Sync Reset)Charge begins to accumulate after the trigger input to CC1 of the DIGITAL terminal, the vertical sync signal is
reset and frame images are output.
(2. 1) 1 Pulse Trigger SYNC-RESET Picture Output Timing
*1: Externally input signal
*2: Exposure time is determined by the setting of "7. 2 (1.3) Changing each setting in E.TRG mode".
*3: VD is generated after 0 to 2H following the completion of the exposure period and the video is synchro-
nized to this and output.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trig-
ger, there will be an effect on the video.