Toshiba IK-TF9U instruction manual Standard Connection, Connector Pin Assignments

4.CONNECTION

4.1 Standard Connection

Lans				Camera control unit		Cable
(option)			Camera cable
				for IK-TF9U	IK-TF9U	(option)
				(option)
						Frame grabber board,	Monitor
	IK-TF9H
		(option)				image process
					DC IN 12V	equipment etc.

DC power supply (option)

4. 2 Cautions on Connection

•Only use optional camera head model # IK-TF9H with this camera controller.

The use of another head may cause damage to the control unit and camera head.

•When connecting the camera cables, be sure to turn off the camera control unit and any other equipment connected to it.

•For DC power supply connecting to DC IN 12V terminal, use UL listed and/or CSA approved ungrounded type AC adaptor with the specifications described below.

Power supply voltage	: 12V DC±10%
Current rating	: More than 830mA, Less than2.5A
Ripple voltage	: Less than 50mV(p–p)
Connector	: HR10A–7P–4S by HIROSE electronics Co. Ltd
	Pins 1, 2	: 12V
	Pins 3, 4	: GND

•If the securing screw on the connector of the camera cable loosens, noise may appear on the screen. Be sure to tighten the connector completely.

•Use the standard cable for Camera Link.

4. 3 Connector Pin Assignments

DC IN 12V

1+12V

2+12V

3GND

4GND

14

23

Connector used:

HR10A-7R-4PB

(HIROSE electronics

Co. Ltd) or equivalent.

DIGITAL				Function	I/O
1	GND	14	GND		–
2	X0-	15	X0+		O
3	X1-	16	X1+		O
4	X2-	17	X2+		O
5	Xcllk-	18	Xcllk+		O
6	X3-	19	X3+		O
7	SerTC+	20	SerTC-	Serial communication control (RXD)	I
8	SerTFG-	21	SerTFG+	Serial communication control (TXD)	O
9	CC1-	22	CC1+	Trigger pulse input	I
10	CC2+	23	CC2-	Partial scanning control	I
11	CC3-	24	CC3+	NC	–
12	CC4+	25	CC4-	NC	–
13	GND	26	GND		–

131

2614

Connector used:

12226-51000-00

(3M) or equivalent.

7