![](/images/new-backgrounds/1110907/110907107x1.webp)
Message | Causes | Corrective Actions |
|
|
|
Timer chip | Faulty system board. | See "Getting Help" on |
counter 2 failed |
| page 199. |
|
|
|
TPM | A TPM configuration | Information only. |
configuration | command has been entered. |
|
operation | The system reboots and |
|
honored. System | executes the command. |
|
will now reset. |
|
|
|
|
|
TPM | This message displays during | Enter I or M to proceed. |
configuration | system restart after a TPM |
|
operation is | configuration command has |
|
pending. Press | been entered. User |
|
(I)to Ignore interaction is required to
OR (M) to Modify proceed. to allow this
change and reset the system.
WARNING: Modifying could prevent security.
TPM failure | A Trusted Platform Module | See "Getting Help" on |
| (TPM) function has failed. | page 199. |
Unable to launch | System halted after F10 |
System Services | keystroke because System |
image. System | Services image is either |
halted! | corrupted in the system |
| firmware or has been lost due |
| to system board replacement. |
| The optional iDRAC6 |
| Enterprise card flash memory |
| or BMC SPI flash may be |
| corrupted. |
Restart the system and update the Lifecycle Controller repository to the latest software to restore full functionality. See the Lifecycle Controller User Guide for more information.
Restore the flash memory using the latest version on support.dell.com. See the Integrated Dellâ„¢ Remote Access Controller 6 (iDRAC6) User Guide for instructions on performing a field replacement of the flash memory.
54
About Your System