Option | Description |
|
|
Determines the order in which the BIOS attempts to | |
Sequence | boot from hard drives in the system during system |
| startup. |
USB Flash Drive | Determines the emulation type for a USB flash drive. |
Emulation Type | Hard disk allows the USB flash drive to act as a hard |
(Auto default) | drive. Floppy allows the USB flash drive to act as a |
| removable diskette drive. Auto automatically chooses an |
| emulation type. |
Boot Sequence Retry | If this field is enabled and the system has failed to boot, |
(Disabled default) | the system reattempts to boot after 30 seconds. |
|
|
Integrated Devices Screen
Option | Description |
|
|
Integrated SAS | Enables or disables the integrated storage controller. |
Controller |
|
(Enabled default) |
|
User Accessible USB | Enables or disables the |
Ports | are All Ports On, Only Back Ports On, and All Ports Off. |
(All Ports On default) |
|
Internal USB Port 1 | Enables or disables the internal USB port. |
(On default) |
|
Internal USB Port 2 | Enables or disables the internal USB port. |
(On default) |
|
Embedded NIC1 and | Enables or disables the OS interface of the two embedded |
NIC2 | NICs. (The NICs may also be accessed through the |
(Enabled default) | system’s management controller.) |
Embedded Gb NICx | Enables or disables the embedded NICs. Options are |
(NIC1 default: Enabled | Enabled, Enabled with PXE, and Enabled with iSCSI |
with PXE; | Boot. PXE support allows the system to boot from the |
Other NICs: Enabled) | network. |
MAC Address | Displays the MAC address for the NIC. |
68
Using the System Setup Program and UEFI Boot Manager
