
10-36 User’s Reference Guide
To go to the IP Address Serving screen, select IP Address Serving in the System Configuration screen and press Return.
IP Address Serving
Number of Client IP Addresses: | 5 |
1st Client Address: | 192.168.6.138 |
Client Default Gateway... | 192.168.6.137 |
Serve DHCP Clients: | Yes |
DHCP NetBios Options... |
|
Serve BOOTP Clients: | Yes |
Serve Dynamic WAN Clients | Yes |
Serve MacIP/KIP Clients: | Yes |
MacIP/KIP Static Options... |
|
Enter the maximum number of dynamic IP clients to support.
Configure Address Serving (DHCP, BOOTP, etc.) here.
Follow these steps to configure IP Address Serving:
■If you enabled IP Address Serving either by using SmartStart or in Easy Setup, DHCP, BootP clients, Dynamic WAN clients, and MacIP/KIP clients (if you have the AppleTalk kit installed) are automatically enabled.
■Select Number of Client IP Addresses and enter the total number of contiguous IP addresses that the Netopia R2020 will distribute to the client machines on your local area network.
■In the screen example shown above, five Client IP addresses have been allocated.
■Select 1st Client Address and enter the first client IP address that you will allocate to your first client machine. For instance, on your local area network you may first want to figure out what machines are going to be allocated specific static IP addresses so that you can determine the pool of IP addresses that you will be serving addresses from via DHCP, BOOTP, Dynamic WAN, and/or MacIP.
■Example: Your ISP has given your Netopia R2020 the IP address 192.168.6.137, with a subnet mask of 255.255.255.248. The subnet mask allocated will give you six IP addresses to use when connecting to the ISP over the Internet (for more information on understanding IP addressing refer to Appendix C, “Understanding IP Addressing.”). Your address range will be
■To enable DHCP, select Serve DHCP Clients and toggle it to Yes. DHCP serving is automatic when IP Address Serving is enabled.