Netopia R2020 manual General Status

13-2 User’s Reference Guide

General Status

		Quick View	6/17/1999 04:40:47 PM
Default IP Gateway:	127.0.0.2	CPU Load: 10% Unused Memory: 541 KB
Domain Name Server:	0.0.0.0	Accounting: Router remaining: 60:00
Domain Name: netopia.com		LocalTalk Address: 34448:149

							Current WAN Port: Auxiliary Port
----------------------				IP Address-------			IPX Address---		EtherTalk-------------------
Ethernet Hub:			192.163.1.1						34449: 150
				Current WAN Connection Status
Profile Name----------				State-%Use-Remote Address-----					Est.-More Info--------------
ISP				P1	10%	IP 92.163.4.1			Lcl	NAT 192.163.100.6
VPN QuickView					LED Status
PWR-+-----		WAN1------	+--	CON--	AUX--	+-----	WAN2------	+--	EN--	+--------	LEDS---------
	LNK RDY CH1 CH2			LNK	LNK	LNK RDY CH1 CH2			DATA '-'= Off 'G'= Green
G	-	- -	-	Y	-	-	- -	-	- 'R'= Red 'Y'= Yellow

Current Date: The current date; this can be set with the Date and Time utility (see “Date and Time” on page 7-11).

Default IP Gateway: The router’s default gateway, which may be either manually configured or learned via DHCP. This is the value you assigned in the Default IP Gateway field on page 6-5. If you are using the router’s defaults (DHCP and NAT) this value will be 0.0.0.0. If you have assigned an IP address as your default gateway, it is shown here.

CPU Load: Percentage of the system’s resources being used by all current transmissions.

Unused Memory: The total remaining system memory available for use.

Domain Name Server: If you are using the router’s defaults (DHCP and NAT) this value will be 0.0.0.0. If you have assigned an IP address as your default gateway, it is shown here.

Accounting: Shows whether you have enabled or disabled the call accounting features.

Domain Name: the domain name you have assigned, typically the name of your ISP

Current WAN Port: Indicates which port is in use.

IP Address: The Netopia R2020’s IP address, entered in the IP Setup screen.

IPX Address: The Netopia R2020’s IPX address, entered in the IPX Setup screen.

EtherTalk Address: The Netopia R2020’s AppleTalk address on its EtherTalk Phase II interface, entered in the EtherTalk Phase II Setup screen (only if the optional AppleTalk feature set is installed).

LocalTalk Address: The Netopia R2020’s AppleTalk address on its LocalTalk interface, entered in the LocalTalk Setup screen (only if the optional AppleTalk feature set is installed).

VPN QuickView. Access point for the VPN QuickView status monitoring screen. See “VPN QuickView” on page 9-9.