Netopia R2020 manual Identify the connectors and attach the cables, Ethernet Telco

2-2 User’s Reference Guide

Windows and Macintosh, ZTerm terminal emulator software and NCSA Telnet 2.6 for Macintosh

You will need:

■A Windows 95-based PC or a Macintosh with Ethernet connectivity for configuring the Netopia R2020. This may be built-in Ethernet or an add-on card, with TCP/IP installed and configured. See “Before running SmartStart” on page 3-1.

■Two telephone lines, each with its own jack.

Identify the connectors and attach the cables

Identify the connectors and switches on the back panel and attach the necessary Netopia Router cables.

1	Ethernet	2	Telco			3	Power
							￿
	8	Ethernet 1
			Line 2	Auxiliary	Console	Line 1	Power
		Normal	Uplink

1.Connect the mini-DIN8 connector from the Power Adapter to the Power port, and plug the other end into an electrical outlet.

2.Connect one end of one of the RJ-11 cables to the “Line 1" port, and the other end to one of your wall outlets.