Netopia R2020 manual Atdt

8-2 User’s Reference Guide

Internal Modem Configuration

Modem Dialing Prefix:	ATDT
PBX Dialing Prefix:
Line 1 Directory Number:
Answer on Ring Type...	Any
Line 2 Directory Number:
Answer on Ring Type...	Any
Speaker On...	Always
Speaker Volume...	2-Medium
Aux Serial Port...	Async Modem
Data Rate (kbps)...	57.6
Aux Modem Init String:	AT&F&C1&D2E0S0=1
Aux Modem Directory Number:

Enter the dialing prefix to be sent to all modems.

Enter Information supplied to you by your telephone company.

■You can enter a PBX or Centrex Dialing Prefix such as “9” if you are on a PBX or Centrex phone system and require a prefix for an outside line.

■Enter the optional telephone or Directory Numbers for the two onboard modems to provide the Netopia R2020 with the information needed to establish a two-channel call using MP or BAP. This will advise the remote side of an inbound data call how to connect to a second channel.

Note: When placing multi-channel calls, the answering equipment must either:

■be in a “hunt group,” where a single telephone number services multiple lines, or

■the answering side must implement MP or BAP as a method to advise the calling side what number(s) to use.

ISPs or corporate IS groups will meet these conditions. For other non-standard dialup connections, you should verify that one or the other of these conditions is true.

■You may choose to selectively Answer inbound calls, based on a distinctive ring pattern, on each onboard modem. This permits you to set up a party line configuration where a fax machine or other device shares