13-10 User’s Reference Guide
(Def) Zone Name: Displays the zone or zones associated with the specified network or network range. The zone name shown is either the only zone or the default zone name for an extended network. To see the complete list of zones for an extended network with multiple zones, select the entry in the table and press the Return key.
Press the Return key again to close the list of zones.
Hops: Displays the number of routers between the Netopia R2020 and the specified network.
State: Displays the state of the specified route, based on the frequency of Routing Table Maintenance Protocol (RTMP) packets received for the route. The state can be Good, Suspect, or Bad. AppleTalk routers regularly exchange RTMP packets to update AppleTalk routing information.
Next Rtr Addr.: Displays the DDP or IP address of the next hop for the specified route. A DDP address is displayed if the router shown is on the local AppleTalk network. DDP address means that a connection to the next hop router is by a native AppleTalk network (e.g.: LocalTalk or EtherTalk Phase II). An IP address is displayed if the Netopia R2020 is connected to the router shown using AURP. IP address means a connection transports over AURP (AppleTalk encapsulated IP).
Pkts Fwded: The number of packets sent to the router shown.
Served IP Addresses
You can view all of the IP addresses currently being served by the Netopia R2020 Dual Analog Router from the Served IP Addresses screen. From the Statistics & Logs menu, select Served IP Addresses.
The Served IP Addresses screen appears.
|
| Served | IP Addresses | |
Client | ||||
SCROLL | ||||
192.168.1.100 | DHCP | 00:36 | EN: | |
192.168.1.101 | DHCP | 00:58 | EN: |
192.168.1.102
192.168.1.103
192.168.1.104
192.168.1.105
192.168.1.106
192.168.1.107
192.168.1.108
192.168.1.109
192.168.1.110
192.168.1.111
192.168.1.112
192.168.1.113
Lease Management...
EN = Ethernet Address; AT = AppleTalk Address; CP = Profile Name; HX = hex
You can manage DHCP leases by selecting Lease Management in this screen.