•Vflash media cards
•USB memory keys
•NIC hardware key
•
•Integrated storage controller card
•iDRAC6 Express card
•iDRAC6 Enterprise card
•Power supplies
•Fans
•Processors and heat sinks
•Memory modules
4Let the system dry thoroughly for at least 24 hours.
5Reinstall the components you removed in step 3.
6Close the system. See "Closing the System" on page 89.
7Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.
If the system does not start properly, see "Getting Help" on page 199.
8If the system starts properly, shut down the system and reinstall all of the expansion cards that you removed. See "Installing an Expansion Card" on page 124.
9Run the appropriate online diagnostic test. See "Using Online Diagnostics" on page 189.
If the tests fail, see "Getting Help" on page 199.
