9Align the basin and drain body assembly with the drain hole in the countertop. Lower the drain body through the countertop drain hole until the basin rests on the countertop.
10.Slide the washer onto the drain body.
11.Thread the nut onto the drain body.
12.Tighten the nut until secure, making sure the drain is properly centered in the basin. Do not overtighten.
Complete the Installation
Optimal/Recommended
Water Delivery Location
Countertop | Apply continuous bead |
| of silicone sealant. |
Important! When installing the tap, the water should contact the basin in the area shown in the diagram for best performance.
1.Apply a thin bead of clear silicone sealant where the basin meets the countertop.
2.Install the tap in accordance with the tap manufacturer’s instructions.
1113919-W2-A
5
