Dell R510 Opening and Closing the System, Installing the Front Bezel, Opening the System

Installing the Front Bezel

1Hook the right end of the bezel onto the chassis.

2Fit the free end of the bezel onto the system.

3Secure the bezel with the keylock. See Figure 3-3.

Opening and Closing the System

WARNING: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by yourself.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

Opening the System

1Turn off the system and attached peripherals, and disconnect the system from the electrical outlet and peripherals.

2If installed, remove the front bezel. See "Removing the Front Bezel" on page 86.

3Rotate the latch release lock on the system cover counter clockwise to the unlocked position. See Figure 3-4 and Figure 3-5.

4Lift the latch on top of the system and slide the cover back.

5Grasp the cover on both sides and lift the cover away from the system. See Figure 3-4 and Figure 3-5.

NOTE: The opening and closing of the system demonstrated in Figure 3-4 also applies to the four–hard-drive systems.

Installing System Components

87