6Holding the card by its edges, position the card so that the card-edge connector aligns with the expansion-card connector on the expansion-card riser.

7Insert the card-edge connector firmly into the expansion-card connector until the card is fully seated.

8Close the expansion-card latch. See Figure 3-20.

Figure 3-20. Installing or Removing an Expansion Card

2

1

3

1

expansion-card riser

2

expansion-card latch

3

expansion card

 

 

9Connect any cables to the expansion card.

Installing System Components

125

Page 125
Image 125
Dell R510 owner manual Connect any cables to the expansion card, 125, Expansion card