If you want to upgrade the version of firmware for the device, please select appropriate Firmware and PIB files together. New firmware versions and PIB files are posted at
Note:
The parameter information of PIB will restore to the factory defaults after resetting the PLC.
To upgrade the device's firmware, follow these instructions:
1.Download PIB file and firmware upgrade file from the
2.Enter the path name or click 
to select the downloaded files on the computer into the corresponding blanks.
3.Click the OK button.
Note:
Do not turn off the device while the firmware is being upgraded. The device will reboot after the Upgrading has been finished.
4.4.2 Reset Device
This Management Utility allows you to reset the Powerline Adapter to its default settings.
Reset Local Device: Click this button to reset the settings of the local Powerline Adapter device only.
Reset All Devices: Click this button to reset the settings of all devices that appear on the Network configuration homepage whose Device’s Password had been entered for the same logical network.
4.4.3Set All Devices’ Network Name
The Set All Devices’ Network Name button allows you to change the logical network of all devices that appear on the Network configuration homepage whose Device’s Password had been entered for the same logical network. A dialog window will appear to report the success of this operation.
All Powerline devices are shipped using a default logical network (network name), which is normally “HomePlugAV”.
To set all devices’ network name, please type the name in the field and click the Set Network Name to apply the setting.
Note:
Every Powerline Adapter on your home network MUST have the same Network Password for connectivity to be established throughout your home.
20
