TL-PA4010 AV500 Nano Powerline Adapter | TP-Link manual

4.4.1 Upgrade Firmware

TL-PA4010AV500 Nano Powerline Adapter

4.4.1 Upgrade Firmware

Click the Upgrade Firmware button to upgrade the version of the firmware for the adapter and the following dialog will pop up.





NVM: None-volatile memory. It is used for upgrading the firmware.

PIB: Parameter Information Block. It contains configuration values that establish device network identity, general capabilities and operational modes.

19

Image 25

TP-Link manual TL-PA4010 AV500 Nano Powerline Adapter, Upgrade Firmware

Contents

Rev 1.0.0 TL-PA4010 AV500 Nano Powerline Adapter COPYRIGHT & TRADEMARKS FCC STATEMENT Safety InformationCE Mark Warning This product can be used in the following countries Product Description AV500 Nano Powerline Adapter DECLARATION OF CONFORMITYRd, Nanshan, Shenzhen, China EN EN EN 61000-3-22006+A12009+A22009 EN EN Package Contents CONTENTSChapter 4 Using the Management Utility Appendix A Troubleshooting TL-PA4010 AV500 Nano Powerline Adapter Package Contents Note 1.3 Important Safety Instructions Chapter 1 Introduction1.1 Conventions 1.2 System Requirement  If liquid has been spilled on the product 2.2 LED Indicator Chapter 2 Connecting Mechanism2.1 Introduction Status Interface 2.3 Physical InterfaceDescription 2.5 Hardware Connection - Computer 2.4 Connection Instruction 2.6 Hardware Connection - Internet  Note Chapter 3 Installing Management Utility TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter 4.1 Status Chapter 4 Using the Management Utility 4.1.1 Set Local Device’s Network Name 4.2 Network Password is unnecessary to enter for renaming 4.2.1 Rename the Remote Device/Enter Password4.2.2 Add Device 4.3 Advanced 4.4 System 4.4.1 Upgrade Firmware 4.4.2 Reset Device To upgrade the devices firmware, follow these instructions Note 4.4.3 Set All Devices’ Network Name 5.2 Set Up a Powerline AV Network with the Pair Button Chapter 5 Advanced Feature How to Use the Pair ButtonsCreate a Powerline network using the Pair button： 5.1 Pair Secure with 128 bits-AES Leave an existing Powerline AV Network Join an existing Powerline AV NetworkThe sequence of Step 1 and Step 2 can be exchanged 1. The Power LED does not light up. Ans. Check the following Appendix A Troubleshooting3. The Powerline LED does not light up 2. The Ethernet LED does not light up. Ans. Check the following