TL-PA4010 AV500 Nano Powerline Adapter | TP-Link specification

Image 17

TP-Link manual TL-PA4010 AV500 Nano Powerline Adapter

Contents

Rev 1.0.0 TL-PA4010 AV500 Nano Powerline Adapter COPYRIGHT & TRADEMARKS CE Mark Warning Safety InformationFCC STATEMENT This product can be used in the following countries Product Description AV500 Nano Powerline Adapter DECLARATION OF CONFORMITYRd, Nanshan, Shenzhen, China EN EN EN 61000-3-22006+A12009+A22009 EN EN Package Contents CONTENTSChapter 4 Using the Management Utility Appendix A Troubleshooting  Note Package ContentsTL-PA4010 AV500 Nano Powerline Adapter 1.3 Important Safety Instructions Chapter 1 Introduction1.1 Conventions 1.2 System Requirement  If liquid has been spilled on the product 2.2 LED Indicator Chapter 2 Connecting Mechanism2.1 Introduction Status Description 2.3 Physical InterfaceInterface 2.5 Hardware Connection - Computer 2.4 Connection Instruction 2.6 Hardware Connection - Internet  Note Chapter 3 Installing Management Utility TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter 4.1 Status Chapter 4 Using the Management Utility 4.1.1 Set Local Device’s Network Name 4.2 Network 4.2.2 Add Device 4.2.1 Rename the Remote Device/Enter PasswordPassword is unnecessary to enter for renaming 4.3 Advanced 4.4 System 4.4.1 Upgrade Firmware 4.4.2 Reset Device To upgrade the devices firmware, follow these instructions Note 4.4.3 Set All Devices’ Network Name 5.2 Set Up a Powerline AV Network with the Pair Button Chapter 5 Advanced Feature How to Use the Pair ButtonsCreate a Powerline network using the Pair button： 5.1 Pair Secure with 128 bits-AES The sequence of Step 1 and Step 2 can be exchanged Join an existing Powerline AV NetworkLeave an existing Powerline AV Network 1. The Power LED does not light up. Ans. Check the following Appendix A Troubleshooting3. The Powerline LED does not light up 2. The Ethernet LED does not light up. Ans. Check the following