TL-PA4010 AV500 Nano Powerline Adapter | TP-Link specs

Image 18

TP-Link manual TL-PA4010 AV500 Nano Powerline Adapter

Contents

TL-PA4010 AV500 Nano Powerline Adapter Rev 1.0.0 COPYRIGHT & TRADEMARKS Safety Information FCC STATEMENTCE Mark Warning This product can be used in the following countries Rd, Nanshan, Shenzhen, China DECLARATION OF CONFORMITYProduct Description AV500 Nano Powerline Adapter EN EN EN 61000-3-22006+A12009+A22009 EN EN Chapter 4 Using the Management Utility CONTENTSPackage Contents Appendix A Troubleshooting Package Contents TL-PA4010 AV500 Nano Powerline Adapter Note 1.1 Conventions Chapter 1 Introduction1.3 Important Safety Instructions 1.2 System Requirement  If liquid has been spilled on the product 2.1 Introduction Chapter 2 Connecting Mechanism2.2 LED Indicator Status 2.3 Physical Interface InterfaceDescription 2.4 Connection Instruction 2.5 Hardware Connection - Computer 2.6 Hardware Connection - Internet TL-PA4010 AV500 Nano Powerline Adapter Chapter 3 Installing Management Utility TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter Chapter 4 Using the Management Utility 4.1 Status 4.1.1 Set Local Device’s Network Name 4.2 Network 4.2.1 Rename the Remote Device/Enter Password Password is unnecessary to enter for renaming4.2.2 Add Device 4.3 Advanced 4.4 System 4.4.1 Upgrade Firmware  Note To upgrade the devices firmware, follow these instructions4.4.2 Reset Device 4.4.3 Set All Devices’ Network Name Create a Powerline network using the Pair button： Chapter 5 Advanced Feature How to Use the Pair Buttons5.2 Set Up a Powerline AV Network with the Pair Button 5.1 Pair Secure with 128 bits-AES Join an existing Powerline AV Network Leave an existing Powerline AV NetworkThe sequence of Step 1 and Step 2 can be exchanged 3. The Powerline LED does not light up Appendix A Troubleshooting1. The Power LED does not light up. Ans. Check the following 2. The Ethernet LED does not light up. Ans. Check the following