TL-PA4010 AV500 Nano Powerline Adapter | TP-Link instruction

Image 16

TP-Link manual TL-PA4010 AV500 Nano Powerline Adapter

Contents

TL-PA4010 AV500 Nano Powerline Adapter Rev 1.0.0 COPYRIGHT & TRADEMARKS FCC STATEMENT Safety InformationCE Mark Warning This product can be used in the following countries DECLARATION OF CONFORMITY Product Description AV500 Nano Powerline AdapterRd, Nanshan, Shenzhen, China EN EN EN 61000-3-22006+A12009+A22009 EN EN CONTENTS Package ContentsChapter 4 Using the Management Utility Appendix A Troubleshooting TL-PA4010 AV500 Nano Powerline Adapter Package Contents Note Chapter 1 Introduction 1.3 Important Safety Instructions1.1 Conventions 1.2 System Requirement  If liquid has been spilled on the product Chapter 2 Connecting Mechanism 2.2 LED Indicator2.1 Introduction Status Interface 2.3 Physical InterfaceDescription 2.4 Connection Instruction 2.5 Hardware Connection - Computer 2.6 Hardware Connection - Internet TL-PA4010 AV500 Nano Powerline Adapter Chapter 3 Installing Management Utility TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter Chapter 4 Using the Management Utility 4.1 Status 4.1.1 Set Local Device’s Network Name 4.2 Network Password is unnecessary to enter for renaming 4.2.1 Rename the Remote Device/Enter Password4.2.2 Add Device 4.3 Advanced 4.4 System 4.4.1 Upgrade Firmware To upgrade the devices firmware, follow these instructions 4.4.2 Reset Device Note 4.4.3 Set All Devices’ Network Name Chapter 5 Advanced Feature How to Use the Pair Buttons 5.2 Set Up a Powerline AV Network with the Pair ButtonCreate a Powerline network using the Pair button： 5.1 Pair Secure with 128 bits-AES Leave an existing Powerline AV Network Join an existing Powerline AV NetworkThe sequence of Step 1 and Step 2 can be exchanged Appendix A Troubleshooting 1. The Power LED does not light up. Ans. Check the following3. The Powerline LED does not light up 2. The Ethernet LED does not light up. Ans. Check the following