TP-Link manual Hardware Connection - Internet, TL-PA4010 AV500 Nano Powerline Adapter

TL-PA4010AV500 Nano Powerline Adapter

2.6 Hardware Connection – Internet

This section describes how to connect the Powerline Adapter into your existing ADSL broadband connection via ADSL Ethernet port. Follow the procedures described below to connect the Powerline Adapter to your ADSL broadband connection:

1．Connect one end of the provided Ethernet (RJ-45) cable to the Powerline Adapter’s Ethernet port.

2．Connect the other end of the Ethernet (RJ-45) cable to an available Ethernet port of your ADSL broadband Router.

3．Plug the Powerline Adapter into a wall socket next to the computer.

4．Turn on your computer.

5．Check and confirm that the Power LED, Ethernet LED, and Powerline Adapter are ON.

The hardware connection mechanism is shown below:

Powerline LED on the

7