Furuno FSV-84 manual 11-9, Interpreting the board test results

11. MAINTENANCE, TROUBLESHOOTING

Interpreting the board test results

•Board name and its revision no. are shown in white. If a board is not inserted or inserted improperly “F” is shown as program number. When a revision no. is improper a hexadecimal from 0-E appears. When an error is found, revision no. and board name appear in red.

•Program no. is shown in white, or red when software finds revision no. error.

•DIP switch setting on each board is shown.

•Memory read/write test results are shown as OK (white) or NG (red).

•Test data check results are shown as OK (white) or NG (red).

•TX +B voltage is measured and displayed.

•Motion sensor test results show OK (white) or NG (red) as overall results and pitch and roll angles.

•KEY 2-0will be displayed only when two control units are installed.

11-9