Furuno FSV-84 manual Programming function keys, Dialog box for erase ship track

8. CUSTOMIZING THE EQUIPMENT

F6: Erase ship’s track

1. Press the [F6] key. The following dialog box appears.

<<ERASE SHIP TRACK>>

100 %

Dialog box for erase ship track

2.Press the [F6] key again. The oldest part of the track will be erased. Each pressing erases approximately 10% of the track.

8.2.2Programming function keys

You can change the default setting of a function key as shown below. Note that all menu items may not be programmed to the function keys. See the menu tree on page AP-1 to AP-4 for items which can be programmed for function keys.

1.Press the [MENU] key to open the menu.

2.Display the menu item which you want to assign to a function key.

3.Press desired function key for more than one second. The display shows the following message for five seconds at the top of the screen.

(FUNCTION KEY REGISTRATION)

REPLACE THE FUNCTION TO NEW

SETTING. PRESS THE KEY AGAIN

TO PROCEED.

Confirmation for registering function key

4.Press the same function key again, and the following message appears. This completes the procedure for programming a function key.

(FUNCTION KEY REGISTRATION)

REGISTRATION COMPLETED.

Confirmation for registering function key

8-6