Additional options
Factory default
All settings can be reset to factory default.
Open the door.
Turn the dishwasher off with the button.
Press and hold the Program button and turn the dishwasher on simultaneously using the button. Keep the Program button pressed for at least four seconds until the lower right program indicator lights up.
If it does not come on, start over.
Press the Program button briefly 12 times.
The "Intake/Drain" indicator flashes once long and twice short.
The sequence of flashing by the upper right program indicator shows whether a setting has been set differently to the default setting.
–upper right program indicator flashes:
all values are set to the default settings.
–upper right program indicator is off: at least one setting has been changed.
To reset the dishwasher to factory default press the "Program" button (for at least one second) until the "Intake/Drain" indicator lights up.
Now press the Program button briefly.
The setting is saved immediately.
Turn the dishwasher off with the button.
37
