Use
At the end of a program
At the end of a program, the optical interface flashes slowly when the door is closed. It will stop 10 minutes after the end of the program.
Open the door.
The message End will appear in the display.
In the "Express" program, the drying fan will run for a few minutes after the program is completed.
Dishes tends to chip if removed still hot from the dishwasher.
Let the dishware cool.
To avoid steam damage to the counter top, open the door after the end of the program either fully or keep it closed until you are removing all the dishes.
Unload the dishwasher.
Dishes tend to break and chip more easily when they are hot.
Allow the dishes to cool until they are comfortable enough to handle before unloading them.
If you open the door fully after switching off, the dishes will cool much faster.
Unloading the lower basket first will prevent water drops from the upper basket and cutlery tray (depending on model) from dropping onto dishes in the lower basket.
Press the button to turn the dishwasher off.
The dishwasher continues to use electricity until turned off with the button.
Preparing your appliance for an extended vacation
If you elect to turn off the water to your home for an extended period of time, please note that this may not be enough to reduce the risk of a leak.
To be completely safe, you must turn off the water supply to each individual appliance. This means under the sink for a dishwasher, at the laundry bib for your washer, etc.
36
