Settings menu
Optimize standby
A few minutes after the last key is pressed or at the end of the program the dishwasher will switch into Standby mode to save energy. The display and the indicators are turned off and only the Start/Stop indicator light flashes slowly.
If the dishwasher is not turned off after the program ends, it will turn completely off after a few minutes in standby mode.
This function can also be turned off. The display and the indicators stay on and the dishwasher will turn off after approx. 6 hours.
Select the desired setting and press the center button.
If refill salt and/or rinse aid or a fault are present in the display, the dishwasher will not turn off.
The refill messages can be turned off when you use a tab detergent. Fault messages cannot be turned off.
Deactivate indicators
If you consistently use "Tab" detergent products in your dishwasher, you can switch the Salt and Rinse Aid indicators off if desired.
Select the desired setting and confirm with the center button.
If you switch to using a detergent that does not contain salt or rinse aid, remember to replenish the salt and rinse aid and turn the indicators back on.
Soak
You can use the Soak function in the program selected for loosening very stubborn food residues. It is not available for every program.
If you are using powder dishwasher detergent, add approx. 1 teaspoon (5 g) to compartment I.
Select the desired setting and confirm with the center button.
Once set, the function will remain active for the programs for which it is available, until the setting is changed.
43
