Water connection

This machine must be connected to
the water supply in accordance with
all national and local plumbing
codes.
,Water in the machine is not
suitable for drinking.
The washer is constructed so that it
may be connected to a water supply
without an extra non-return valve,
unless required by code.
Faucets and drain connections should
be situated as close to the machine as
possible, and be easily accessible.
Water supply pressure
Hot + Cold water connection =
min. 22 psi - max.145 psi
DI water connection =
min. 9 psi - max. 145 psi
Recommended water pressure
Hot + Cold water connection =
over 37 psi - max.145 psi
DI water connection =
over 22 psi - max. 145 psi
to avoid long intake times
The machine cannot be operated with
an inflow pressure of less than 10 psi.
The machine is supplied with
3 connection hoses 5 ft. (1.5 m) long
with 3/4" (19 mm) female hose thread
ends.
Large area filters, supplied with the
machine, are to be installed in the hose
attached to the water supply. See
"Cleaning and Care - Cleaning the
water inlet filters".
,Do not shorten or damage the
hoses!
Do not remove the filters in the
hoses.
Plumbing
42