,Use only cleaning detergents
and neutralizers specially designed
for lab washers and regard the
application recommendations of the
manufacturer.
This automatic cleaning machine is
fitted with 4 dispensers:
–Dispensing system DOS 1 (blue) to
dispense liquid detergent. The
dosing rate is 200 ml/min.
– Dispensing system DOS 2 (white).
The dosing rate is 105 ml/min.
– Dispensing system DOS 3 (red).
The dosing rate is 105 ml/min.
– Dispensing system DOS 4 (green).
The dosing rate is 465 ml/min.
The amounts of cleaning agent
required, depending on the application
chosen for this machine, are dispensed
through these dispensing systems.
Preparing the DOS dispensers
The liquids can be filled into 10 l plastic
containers, which are color coded for
the corresponding dispensing system.
When first commissioning, or when the
message "FILL DOS 1 CONTAINER"
and/or DOS 2, 3, 4 flashes in the
display after switching on or at the end
of a program, fill the storage container
with the correct detergent or neutralizer.
If the message "CHECK DISPENSING
SYSTEM 1" and/or "DISPENSING
SYSTEM 4" flashes in the display, (the
program has been automatically put on
hold), check the storage container and
dispensing hoses, refill if necessary.
When first commissioning or when
the message "CHECK DISPENSING
SYSTEM... ", appears, start the
DOS-FILL program to prime the
dispensing system (see "Priming the
liquid dispensing systems").
,Use caution when handling
detergents!
Follow the instructions and relevant
safety procedures carefully.
Wear protective gloves and goggles.
Adding liquid detergents and neutralizers
22