More about manual operation
Delaying the start with Automatic switch-off
We recommend using automatic switching on and off when roasting. However, do not delay the start for too long when baking as the cake mixture or dough will dry out, and the raising agents will lose their effectiveness.
To switch a programme on and off automatically you have various options:
–Enter the Duration and Finish time.
–Enter the Start time and the Duration.
–Enter the Start time and the Finish.
Example:
The time is 11:30. Your dish will take 30 minutes to cook, and needs to be ready at 12:30.
Select Duration and enter 0:30 h.
Then select Finish and enter 12:30 h.
The Start time will be calculated automatically. "Start at 12:00" will appear in the display.
The cooking programme will start at this time.
Sequence of the cooking programme when using Automatic
The following will appear in the display:
Before the programme starts
–The cooking function and selected temperature
–"Start at" and the start time
After the programme has started
–The
–Once this temperature is reached, a tone will sound (provided this is activated - see "Settings - Volume - Buzzer tones").
After the heating-up phase
– The "Time left" counting down
Shortly before the end of the programme
–The oven heating switches off.
–The cooking programme continues using residual heat. The residual heat in the oven is sufficient to complete the cooking process.
–Energy save phase will appear in the display.
–The cooling fan continues to run, as does the hot air fan if a "Fan" setting has been chosen.
At the end of the cooking programme
–The hot air fan switches off, depending on the cooking function being used.
–The message "Programme finished" and the symbol appear in the display.
–A tone will sound (provided this is activated - see "Settings - Volume - Buzzer tones").
34