|
| Problem solving guide |
|
| |
|
|
|
Problem | Possible cause and remedy | |
"Maximum operating | Safety | |
duration reached" | The appliance will be ready for use again after it has been | |
appears in the | switched off and then back on again. | |
display. |
|
|
The oven has | The oven switches off automatically to save energy if, at the | |
automatically | end of an Automatic programme or a cooking programme | |
switched itself off | with Automatic | |
after a cooking | selected within a certain time period. | |
programme. | The oven is ready for use again when you switch it on. | |
A fault code | You can rectify the faults with the following codes yourself: | |
appears in the | – Fault 23: The temperature required for pyrolytic cleaning | |
display: F + a |
| was not reached. |
number |
| This could have been caused by too much soiling in the |
|
| oven to start with. |
|
| Remove all coarse soiling before starting the pyrolytic |
|
| cleaning programme again. |
|
| If the fault message appears again please contact the |
|
| Miele Service Department. |
| – | Fault 32: The door has not locked for the pyrolytic |
|
| cleaning process. |
|
| Switch the oven off and start the pyrolytic cleaning |
|
| process again. |
|
| If the fault code appears again call the Miele Service |
|
| Department. |
| – | Fault 33: The door lock for the pyrolytic cleaning process |
|
| will not open. |
|
| Interrupt the pyrolytic cleaning programme by switching |
|
| the oven off. If the door will still not open please contact |
|
| the Miele Service Department. |
For all other fault codes please contact the Miele Service
Department.
75